Follow Avatar

Bson L

Farming in United Kingdom

Thumb

0 repins 0 comments

In my SpaceLab Entry, named the Klaus Capsule after Klaus from American Dad: I am proposing an experiment involving fish in space. It would be capsule in which a fish could use to swim around a space station. Please give me feedback whether it is good or bad and feel free to ask any questions.. Please in full screen or in large version if the text is not visible. The aim of this space lab entry is to finally allow humans and fish to live alongside each other in the same environment. This could be the end of having them confined in a small tank in the corner of one's room. It would be achieved by creating a plastic capsule in which the fish could use to swim around the space station. Obviously the capsules should be cleaned and the 'oxygenated' water would have to be replaced which is why the design includes a hatch. This would also be to allow them to enter and leave the capsule. During landing and take off, all of the fish would be kept inside a plastic bag aquarium- but when finally in orbit, the experiment would be conducted by leaving one group in the aquarium and allowing another into the capsules. I expect this would be good for the mental and physical health of the fish. *THE EXPERIMENT DOES NOT HAVE TO USE A PLASTIC BAG AQUARIUM. This is simply a rough guideline while the most suited habitat is selected. At the moment the best candidate is the butterfly habitat with a few modifications such as replacing the air vents with a tube supplying oxygenated water. I have been interested in space since the age of two- one thing I remember very well is the solar eclipse in 1999. I wish to be an astronomer and cosmologist when I'm older. Your vote would be a privilege and would bring me one step closer to that goal!

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

DOHA - Let them eat jam tomorrow (Full text of the speech) Doha negotiations 12.09.11 Mr. President, There was a British author called Lewis Carrol who wrote a rather famous book "Alice in Wonderland" and this book had a sequel "Alice though the Looking Glass". In that book there is a passage where the Red Queen tells Alice "The rule is, jam yesterday and jam tomorrow but never jam to-day.' Alice said "But it must happen sometimes that there is "jam to-day",' To which the Queen said and here I paraphrase: "No, there is never jam to-day." Well that is rather like the EU and the successive Doha Rounds. We do never get the jam. There is a reason for this. The Parliament's own Library briefing states that the focus of the Doha Round was to be on Development. Now for most developing countries the critical aspect of the Doha Round is Agriculture. Around three quarters of the population of developing countries reside in rural areas and a majority depend on agriculture. The European Union's Common Agricultural Policy or CAP is equivalent to about 80 billion US dollar per year. This huge subsidy is a distorting factor in world food markets. It erodes the fair operation of the market in food, generates export dumping, and damages the ability of farmers in the developing world to earn a living. I must further point out that a disproportionate amount of the CAP goes on subsidising the growing of sugar beet. This crop grown in the developed world can never be fully competitive without subsidy with sugar cane. It is the continuance of the CAP in its present form which sabotages a proper result from the Doha Round. What then are the prospects for meaningful reform of the CAP? The answer is that there are too many politicians in the European Parliament who are opposed to a meaningful reform of the CAP - it is just not going to happen. No meaningful reform of the CAP means no meaningful outcome to the Doha rounds. Thank you.

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

Baling silage with krone fortima baler co roscommon ireland ,the first working fortima in ireland Fortima -- the powerful combination of proven engineering and innovative technology. - The variable bale chamber produces 1.00-1.50 m (3'3"-4'11") or 1.00-1.80 m (3'3"-5'11") diameter bales - The chain-and-slat elevator handles the most difficult conditions - The camless EasyFlow pick-up boosts throughput and reduces wear and tear - The selectable MultiCut cutting system features 17 knives - QuattroSpeed -- the new twine tying system for four threads - The well-proven net wrapping system for even higher throughputs Fortima is the name of the new round baler that supersedes Krone's roundPack model, an established machine that has proven ten thousands of times all over the world. In terms of its external styling, the new round baler resembles Comprima and is equally powerful and efficient, offering high operator comfort, a clear-cut design and a uniquely high level of specification. The variable chamber Fortima is marketed in two versions: Fortima V 1500 (1-1.5m bale diameters) and Fortima V 1800 (1-1.8m bale diameters); each version may be specified with Krone's MultiCut cutting system. Featuring the 12.05m EasyFlow pick-up unit, the slat-and-chain elevator as well as net wrap and/or twine wrapping technology, Fortima gives evidence of Krone's advanced round baler technology, which evolved during decades of in-field experience. The new EasyFlow pick-up is mounted right on the rotor discs on either end of the pick-up, a design that eliminates the need for a traditional cam track and hence a major area of wear. This camless technology provides a number of obvious advantages: Firstly, it results in a more clear-cut design after the machine shed quite a number of moving parts, which would be subject to wear and tear. Operators report they noticed an up to 60 percent decrease in wear costs. Further costs are saved on reduced service and maintenance. In addition, the camless EasyFlow pick-up operates at a 30% higher speed than a standard pick-up with cam and offers noticeably quieter running as well. The MultiCut rotor cutter gives controlled cuts and is a synonym for best quality, convenient knife change and locking. Feeding the crops in a continuous flow through the knives, MultiCut produces nominal cutting lengths of down to 64mm when using all 17 knives. The knives are operated in sets of 17, 15, 7 or 0. The model without cutting system has a 415mm diameter feed rotor, which is arranged between the pick-up and the baling chamber to improve the flow of crop into the machine and boost the overall output. Its tines are attached in a V arrangement and it is this design that accounts for particularly firm edges, also when baling from thin and narrow swaths. The well-proven chain elevator technology reduces tractor power input to an absolute minimum and will therefore operate behind a 50hp tractor. Narrowly spaced slats reduce friction and power loss in order to provide superior bale feed and baling performance. As the slats mesh with the material, they give the elevator a better grip for a more positive rotation of the bale -- an enormous benefit in very dry or very wet crops. The highlight of the baling chamber is the new and larger pulleys, which are more durable and harder wearing, give quieter running and provide for higher densities. The new twine box is sealed against spraying water and rain and stores up to 11 balls of twine, which are conveniently replaced from the ground. The new twine tying system uses four threads to wrap the bales really tight and cut down the tying cycle. Baler operation is new, too, and responds to user wishes. The new Comfort operating unit brings ISOBUS compatibility, so that the operator can operate Fortima from the Beta terminal or the CCI-ISOBUS terminal. All operation is carried out from the cab, including function testing and setting the number of net wraps. In addition, the operator can program a wide range of features (e.g. signalling completion of a job

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments

Thumb

0 repins 0 comments